The other day, I drug out my longbow for some practice, after allowing several days for the glue to dry on the new snake skin backing. After I brought it out and started to shoot, my youngest son, who is 7 came and asked if he could join me. Feeling somewhat frustrated because I wanted to do some serious practice, I relented and he went and got his bow, a "L'il Banshee" and his 18" arrows and joined alongside.
I was not aware of how much he has grown in the past few months, the bow is still a little big for him, but he is doing better. At a distance of seven yards we set up and he started to shoot the 3-D deer target we have been using for the past few years. Time and again, he would draw back and shoot, hitting the deer in the vitals. Being a traditional shooter, I do not have sights on his bow, and he shoots with his fingers. It is my opinion that starting them in this manner is easier than beginning with sights and then taking them away later.
We stood out there for about an hour, he would shoot two arrows and I would shoot two arrows, scoring each shot. The time I spent practicing was not serious, but it was enjoyable, and it reminded me of the importance of spending this time with my son.
Was the practice session wasted? Certainly not, was it beneficial, sure it was, I would not have practiced the close in shots had he not been there, and I saw that I needed that close practice. But more importantly I was able to spend time with my son and have the opportunity to instill in him the love of archery I have. I hope these practice sessions will be something we can do for years to come as he grows and matures, that when I am an old man, he will have the patience to stand there with me, while I practice the close shots. Regardless of what happens, these moments are some of the best times.
Tuesday, July 15, 2008
Saturday, July 5, 2008
SnakeSkin backing to Longbow
In my earlier post I shared the Timber Rattler I got while doing some scouting. I took this snake home, skinned it, dried the skin and attacked it to my longbow. Here are some Pictures and how I did it. It make a great addition to your traditional archery gear.
The easiest way to skin a snake is to take some sharp scissors and cut along their belly line the length of the snake. This helps to keep a straight line. Once the cut is made, simply peel the skin off of the meat. At the anal opening, it does get tricky, so you may have to use a razor blade to trim the area.
Once the skin is off. You can either use cardboard, or as I did small brad nails and stretch the skin width ways using the nails to keep the skin as wide as possible. Alternate the nails from side to side. It is best to keep them directly across one another. Keep the nails only a couple of inches apart and tack both sides the length of the skin.
Once stretched, use borax (20 Mule team) and liberally coat the skin making sure to cover it completely. The borax will absorb all moisture and completely dry the skin. I left mine stretched for one week. Checking it every other day or so and added borax where needed.
Once it is dry, i used a shop vacuum to remove the borax, this helps to get it all off of the skin. Then remove the tacks and you are done with drying.
To attach it to your bow; First you must clean your bow. Using either mineral spirits or rubbing alcohol, liberally apply and rub thoroughly. Allow it to evaporate completely before you begin. Using good contact cement such as Barge cement. Follow the directions. Lightly coat your bow with a layer of cement, and then coat the skin - making sure the pattern aligns how you like it. Allow the cement to dry for about five minutes, then while holding the skin in the air, place the skin next to the handle and press. It will stick immediately and does not allow for much adjusting, so make sure it is aligned properly. Gently press the skin along the length of the bow limb - again make sure you are aligned correctly. Pressing with your finger. Allow it to set for a few minutes. Then using a razor blade (I used an exacto) trim the excess skin from the bow. (be careful not to cut your bow). Repeat for the other limb. Allow to set at least 24 hours before use.
To remove the scales, the easiest way is with masking tape. Press the masking tape on the skin firmly and lift. Scales will come off with the tape, repeat this until all scales are removed.
I did the bow pictured with one snake skin. I was careful to align the pattern so I could use different portions of the skin for different limbs.
I love how it turned out. This is my first attempt at this, but it is not difficult. If you do not have a snake skin, you can purchase them from 3 rivers archery where I got my instructions on how to apply the skin. (http://www.3riversarchery.com/)
Monday, June 30, 2008
Deer Scouting and Timber Rattlers
This past weekend a friend and I went to my deer hunting grounds to set ups deer stands for the coming season. It is something I do every June. Set stands, trim shooting lanes, and open visibility in these thick southern woods. We relocated a few stands and trimmed some others. At one location, we were busy trimming lanes in a pine forest. When my friend, said in a matter of fact way. "look over there." I stopped my activity and said, "where?" thinking he had seen a deer and scanning the woods for the white tail bounding through the woods. "There is a snake." he said very calmly. I appreciated his calmness at this moment. Freaking out at a moment like that can cause some real problems when snakes are involved.
I looked and immediately noticed a Timber Rattler not more than seven (7) feet away coiled up next to a small log. Just laying there, not rattling, just watching us. "That is a timber rattler." one of us said, "be still, I will move behind him." The rattler was obviously focused on Chad, and I moved behind the snake, unsheathed my .22 pistol that I carry for just such opportunities as this, and moved in.
Approaching the snake from behind I moved to with in a few inches and shot the snake in the head with my "shotshell" .22. This is the ideal ammunition for this situation, the little #12 shot will offer a broad pattern covering a few inches, but more than sufficient for the snake. A follow up shot confirmed his demise. We then removed his head for extra security and now his skin is stretched and drying in my shop.
For a Timber rattler he was huge, tape measured to exactly 48 inches with 10 rattlers. - Note to self. Wear chaps when approaching this sand in early season. - This is the second Timber Rattler we have taken in these same woods, with the other measuring 46 inches with 8 rattles.
I will say though, this is one of the prettiest snakes in the woods, with is coloration and shape. I am glad I had the .22, but I was surprised he never rattled at us.
Subscribe to:
Posts (Atom)